Learn more about your
Philips HomeRun Vacuum and Mop Robot 7000 Series Aqua

1. Install the station within the correct dimensions for placement.
2. Connect the station to the power supply. Make sure that the remaining part of the power cable is well concealed behind the station so that the robot cannot drive over it.

1. Scan the QR code on the package of the robot. Or: search for 'Philips HomeRun robot app' in the Apple App Store or one of the Android App Stores. Download and install the app.
2. Register a personal account to benefit from the following advantages:

- Control the robot from more than one device, e.g. a smart phone and tablet, or add multiple users in the household.

- Save back-up of important data like customized cleaning plans for your home.

Note: If you change your phone and you don't have an account, then you'll lose all customized cleaning plans.

1. Make sure that the robot and your mobile device have good Wi-Fi coverage.
2. Select the model of your robot. You can select the model of your robot by scanning the QR code on top of the robot, or you can look up the model number yourself on the type plate at the back of the station.
3. Press and hold the on/off button and home button at the same time for three seconds. The lights in the buttons will flash orange to indicate that the robotis in in Wi-Fi set-up mode
4. Click the join button if it's visible in the app to connect with the 'Philips robot' network. Note: If the join button is not visible in the app, leave the app and go to Wi-Fi under 'Settings' on your mobile device. There you can select the 'Philips robot' network and connect to it.

If the Wi-Fi pairing fails:

• Check if you have selected the correct robot model.
• Check your Wi-Fi connection
• Check if you entered the correct Wi-Fi password.
• Check if the robot is still in Wi-Fi set-up mode: You can recognize this if the lights in the two buttons on the robot are still flashing orange.